KAWAGUCHI JEKS365

I have not used a drawing tool is, of course I do not know how the tool works. Maybe you could share a little about your experience using this tool, is effective enough to help the process of drawing? Chula Vista towing

I think it's the brand of the machine. Or maybe the type of it, I don't really know about that name.
iPad Charger

Couldn't be written any better. Reading this post reminds me of my old room mate! He always kept talking about this. I will forward this article to him. Pretty sure he will have a good read. Thanks for sharing!
queen memory foam mattress

Did you try Kawaguchi?

Keep on molding!

brent

We have KAWAGUCHI KM50 machines. We need to replace it's Hydraulic pump assembly along with Encoder.Can you please tell me from where i can buy it.

THank You
Vikas
+91-88261928
vikas@jailaxmient.com

Dear Sir or Madam,
Good day to you. Me Mr. Ahamed from Bangladesh. I am looking for used Kawaguchi Injection Molding machines of Japan origin. The models we need are:
1) Kawaguchi K-80B---1 unit
2) Kawaguchi K-120B---1 unit
3) Kawaguchi KM-140B---1 unit
4) Kawaguchi KM-180B---1 unit

If possible then please send us CNF Chittagong Port Bangladesh offer for above items.

Your cooperation is highly appreciated.

Thanks & Best Regards

Ahamed Musa
Business Director
A3R Associates Pte. Ltd.
Dhaka, Bangladesh.
Cell # +88 0183 2323 501
E-mail: MUSADHAKA@AOL.COM

If the dip-switch (s) is (are) not right, you could think it is in °F and be i °C or vice- versa.

Keep on Molding!

brent

Hi
We need an operating Manual for Kawaguchi K660 extrusion machine or any help regarding the DIPswitch heatstarter.

Thanks

Peter

[font size="1" color="#FF0000"]LAST EDITED ON 09-06-05 AT 04:55 PM (GMT)[/font][p]Hey dister

I got all the schematics in the world but its hard to find replacement parts for the mechanics. As you probably know the electrical side of things is simple. Let me know how I can contact you. P.S. I did solve my problem by remodifying the clamp limit switch station to a different design. Works great.

Pulse

Hello pulse, I have a JEKS265, And am in need for any schemes you may have for this machine, I wish I could help you with your problem, but as you said the 265 & the 365 parts will not interchange. But I do know some people that may be able to help If you havent had any luck yet.

Do you have any information on a KAWAGUCHI JEKS-120, SERIAL NUMBER S8-E73519 Injection Molding Machine. Diagrams would be most helpful, so would a manual. Any information you have would be appreciated or if you could tell us where to go to obtain the information that would be helpful as well.
Debra Sullivan
neolube@comcast.net
Phone: 810-984-4213
Fax: 810-987-4199
Hold-It, Inc.
P.O. Box 611391
Port Huron, MI 48061-1391

We have a JEKS120 and we are looking for books, manual and drawings on the machine. Please let me know if you have anything like that available.

Debra Sullivan
neolube@comcast.net
Phone: 810-984-4213
Fax: 810-987-4199
Hold-It, Inc.

Do you have any information on a JEKS-120 Machine. Diagrams would be most helpful, so would a manual. Any information you have would be appreciated or if you could tell us where to go to obtain the information that would be helpful as well.

Debra Sullivan
neolube@comcast.net
Phone: 810-984-4213
Fax: 810-987-4199
Hold-It, Inc.

Hi.. I'm interested in those drawings for the JEKS-120.

I'm also looking for the motor force in (HP)

please email me a note so I can give you my fax number

felix.verdon@camc.ge.com

thanks

Pulse
Have you contacted any of the machine brokers around? I'll bet you would be able to pick up entire machines from the 70's for the cost of hauling them away. If you need some names let me know.
Bruce

Thanks erdy. I have drawings for the 265s but the part I need spec for is specific to the 365. Its the arm thats connected from the crosshead to the clamp limit station. This arm gets bigger with the bigger machines. Where do you buy your parts from? The service lady at Kawaguchi is the worst person to deal with. Its like talking to a brick wall. I called Mould Tek in canada but they werent much of a help either. If you ever need parts you can call me cause I have a whole bunch of spares I stripped from an old machine.

HI,I have here a hydraulic drawing of JEKS 120 w/ valves and manufacturer,if you want let me know and i will fax it to you.
regards,
erdy