plating for optical finish

Eye problem occasionally can't be cured effortlessly. The actual eye are usually delicate appendage. It really is needed additional care as well as the organ is fairly crucial in life. rap beats

Emotional attention, self-control, approval, adhere to, patience but also security. These are typically among the issues that Tang Soo Can do, most of the Thai martial art attached to self defense purposes, can show buyers plus instilling within your soul the indicates not just to sustain along with your own eyes on the competency on the quite first real danger stains to cure confrontation all in all.
craftmatic prices

Have to agree with floatingfloc that using titanium will be a better choice of plating. Have you come to a conclusion so far? - http://www.deeplas.co.uk

You could Try Nanodiamond mold coating.
The self applied coating,Nano PND was formulated with spherical Nano diamond particles (3-5 nanometers)with excellent scratch resistance up to 4H pencil hardness, good releasing, as well as corrosion resistance up to 1500hrs salt test ASTM B117.

A good choice for optical polish mold.

More information from,
www.nanomouldrelease.com
www.moldreleasenanotechnology.com

I thought Stavax was already somewhat hard and provided some corrosion resistance ????

What is the hardness of your core?

I have had extremely good luck with 'Polyond'

It's a great corrosion and release plating and will go into waterlines as well. It's a nickel teflon plating but unlike most. A special process in which the teflon is applied and baked. Hardness up to 62 Rc .

It replicates the surface finish of your steel and can be stripped with outstanding results

Polycoatings of the South
941.371.2247
Ask for Bernie or Wayne Zapatha

These guys really know plating.

PS: If you are considering a chrome plate or chrome variation, you might want to electroless nickel the steel first in case you ever need to strip the chrome. The same acid used to strip chrome also eats steel. I learned this trick the hard way.

I'm a big fan of plating however there's a technology from China (no kidding) called NanoCoating that appears to be just what you want.

contact Nanoplas Inc. 2140 Touhy Ave. Elk Grove Village, IL 60007 U.S.A.

Give them a whirl

Hope this helps

Bill Tobin

Thanks for your replies. I used Bekaert DLN plating before. That is a good stuff, with one downside though. If it does not come out right, then stripping completely ruins the optical finish. The electroless nickel on the other hand strips easy and requires only a light diamond buff to restore the finish. Will need to make a decision soon. May be Matt's article will shed some light. My e-mail is emargolin@seahorsebio.com
Thanks,
Eugene.

Eugene-

I've a good whitepaper on electroless nickel plating that I can send to you---about four pages with some good info. Just send me your email; mine is matt.defosse@cancom.com.

Matt

I think Electroless nickel plating will not work in this case as Nickel's hardness is not enought,Titanium
layer is recommended.or you may take a look to www.Bekaert.com,they provide special plating layer to protect your mould.