Primary links

Sumitomo SD30

By jag
Published: November 24th, 2009

Hi We have a problem with our injection moulding machine Sumitomo SD30 every time we turn the pump off lot of oil blows out of breather hole.Nitrogen ok,pump is primed, is any one out their who had similar problem.

Thanks in advance.

‹ Need a Scoremaker II manual for VD 75 RS Horizontal Injection Molding Machine Lockout/Tagout Question ›

Hi Sorry for delay i dont

Submitted by Anonymous on October 27, 2011 - 5:19am.

Hi Sorry for delay i dont understand the question is this some thing that you need.

Hi Sorry for late

Submitted by Anonymous on October 27, 2011 - 5:17am.

Hi Sorry for late reply
Problem was accumulator bladder leaking.

Sir, can you pls provide me

Submitted by Anonymous on June 7, 2011 - 6:59am.

Sir, can you pls provide me with Start up and shut down operating instruction of SD 30, tnx

Sounds like a broken oil line

Submitted by bob on July 21, 2010 - 10:05pm.

Sounds like a broken oil line or hose in the oil tank!

Media Kit  |  Privacy Policy  |  Contact  |  Feedback  |  Subscribe | | |

© 2011 UBM Canon | please visit these other sites

UBM Canon | Design News | Test & Measurement World | Packaging Digest | EDN | Qmed | Pharmalive | Appliance Magazine | Powder Bulk Solids | Canon Trade Shows