Materials
- Login to post new content in the forum.
| Topic | Replies | Created | Last reply | |
|---|---|---|---|---|
|
Hermetically sealing Polypropylene | 7 | 1 week 6 days ago by dlevine |
1 week 2 days ago by dlevine |
|
|
Purging compounds | 11 | 2 years 1 week ago by admin |
1 week 6 days ago by aman2u |
|
|
PC-ABS material properties change with added colorants | 3 | 3 weeks 3 days ago by Rode |
3 weeks 12 hours ago by plastics101 |
|
Material for Car Bumper Manufacturing | 17 | 1 year 19 weeks ago by heman2727 |
3 weeks 6 days ago by justin.will |
|
|
strongest plastic in tensile | 9 | 2 years 1 week ago by Bruce |
4 weeks 19 hours ago by aman2u |
|
|
Bonding Santoprene to HDPE | 12 | 2 years 1 week ago by admin |
4 weeks 3 days ago by ecommerce |
|
|
Suction Cups | 3 | 5 weeks 1 day ago by joey1000 |
5 weeks 2 hours ago by bill4012 |
|
|
Living Hinges | 1 | 14 weeks 10 hours ago by APlastics123 |
13 weeks 2 days ago by JDub |
|
|
Contamination in regrind | 8 | 1 year 24 weeks ago by geauxirish |
13 weeks 6 days ago by patrickculverton |
|
|
DuPont Elvax 150 | 0 | 15 weeks 3 days ago by Ralph Barnes |
n/a |
|
|
What type/mixture of Polypropylene do you think they are using to make these? | 1 | 18 weeks 3 hours ago by NoobPlastics |
17 weeks 9 hours ago by bill4012 |
|
|
powder feeding/loading | 2 | 21 weeks 2 days ago by Lisa C. |
19 weeks 1 day ago by bill4012 |
|
|
Tritan Copolyester Material from Eastman | 3 | 22 weeks 6 days ago by cdabrow |
19 weeks 4 days ago by cdabrow |
|
|
Resin material suppliers Production Support | 0 | 27 weeks 3 days ago by Matengine |
n/a |
|
|
A series of non-technical questions | 4 | 29 weeks 5 days ago by Drew Vedbraaten |
28 weeks 5 days ago by Drew Vedbraaten |
|
|
Liquid Silicone Molding Expert | 0 | 29 weeks 2 days ago by bill4012 |
n/a |
|
|
PET viscosity enhancer | 1 | 2 years 1 week ago by denonpmb |
32 weeks 6 days ago by griffex |
|
|
Seperating ABS and Glassfiber | 2 | 33 weeks 1 day ago by jonturka |
33 weeks 1 day ago by jonturka |
|
|
Rheological Behavior of Fluids | 1 | 2 years 1 week ago by polymerblogspot |
35 weeks 1 day ago by sohail |
|
|
Bosses polypropylene failure... help! | 3 | 39 weeks 7 hours ago by Lsr25a |
37 weeks 5 days ago by First_Bruce |
|
|
Material Selection criteria | 1 | 44 weeks 3 days ago by joey1000 |
44 weeks 2 days ago by billbas62 |
|
|
Lamination at 160C | 2 | 1 year 2 weeks ago by syedtar |
1 year 2 weeks ago by syedtar |
|
|
Polyamide 6 - Glass filled VS glass and mineral filled | 7 | 2 years 1 week ago by lmars |
1 year 3 weeks ago by satishl |
|
|
Degradation or residence time limit for plastics | 4 | 1 year 8 weeks ago by raja_i1992 |
1 year 5 weeks ago by raja_i1992 |
|
|
Rotational molding PP | 2 | 1 year 11 weeks ago by raja_i1992 |
1 year 9 weeks ago by raja_i1992 |
