Featured Articles

Sidel opens South African subsidiary

By PlasticsToday Staff
Published: October 8th, 2010

Present in South Africa for 30 years through its agent, the Sidel Group has created its own subsidiary in the country as a center from which to service its installed base of more than 400 pieces of equipment in Southern Africa. Since June the Johannesburg-based company has acted as the home base to support all countries in Southern Africa, including Namibia, Botswana, Zimbabwe, Zambia, Malawi, Tanzania, Mozambique, Lesotho, and Swaziland.

Innovation, collaboration, and policy keys to U.S. manufacturing success

By Clare Goldsberry
Published: October 7th, 2010

The American Mold Builders Assn. went to Washington, DC (Sept. 28-30), and members came away from their annual Fall Conference event hopeful that the input members of the Senate and House of Representatives received from the nearly 40 attendees will make a difference for manufacturing in the United States.

Plastic windshield ripe for the racetrack

By MPW Staff
Published: October 7th, 2010

Eyes have been on polycarbonate window glazing as the material most likely to replace glass in car fenestration, but another clear, durable thermoplastic—acrylic—is making news with its debut as the replacement for glass in the windshield in RED Motorsport's Lotus Exige racecar. 

Coke, Frigoglass partnership funnels PCR PET into cooler components

By PlasticsToday Staff
Published: October 7th, 2010

Beverage coolers supplier Frigoglass has paired with Coca-Cola Recycling LLC to convert post-consumer polyethylene terephthalate (PET) beverage bottles into beverage cooler components. According to Tom Jezior, director key accounts, Frigoglass North America, the recycled PET comes from specially processed post-consumer bottles.

IQMS launches real-time process monitoring module that links to EnterpriseIQ ERP

By PlasticsToday Staff
Published: October 7th, 2010

Enterprise resource planning (ERP) software IQMS (Paso Robles, CA) launched its debut of RealTime Process Monitoring module, which directly connects manufacturing machines with the existing EnterpriseIQ manufacturing ERP system. This allows the system to capture, view, and analyze process data parameters as the parts are being produced. IQMS says that since everything is designed and developed by itself, no third party interfaces are required.

TI Automotive gets massive order from VW for blowmolded plastic fuel tanks, lines

By MPW Staff
Published: October 6th, 2010

The Tier One automotive supplier has been tasked by the world's second-largest carmaker to supply it with six million plastic filler pipes as well as up to 3 million fuel tank systems. TI Automotive's award-winning "ship-in-a-bottle" fuel tank design will be used for the blowmolded tanks.

Plastics lids recognized by WSJ, and soon bound for U.S., Europe

By Matt Defosse
Published: October 6th, 2010

On the heels of its recognition by the Wall Street Journal as one of the most innovative technologies for 2010, Australian packaging developer Smart Lid Systems has announced it will take its packaging to the U.S., first importing the thermoformed lids but eventually finding a domestic processor to take up the work.

Blowmolded three-layer plastic tanks receive CARB, EPA approval

By MPW Staff
Published: October 6th, 2010

The blowmolding grade of Solvay Advanced Polymers' reformulated Ixef BXT 2000-0203 polyarylamide has been approved by the California Air Resources Board (CARB) and the U.S. Environmental Protection Agency (EPA) as a barrier material for three-layer fuel tank systems for lawnmowers, snow blowers, weed trimmers, generators, and other small off-road equipment. First commercial use in such an application is expected in 2011, says the supplier.

ISM report contains potentially troubling signs

By PlasticsToday Staff
Published: October 6th, 2010

While economic activity in the manufacturing sector expanded in September 2010 for the 14th consecutive month, and the overall economy grew for the 17th consecutive month, the numbers also show a weakening that taints the picture. The latest ISM Manufacturing Report on Business, issued Oct. 1 by Norbert J. Ore, CPSM, CPM, and chair of the ISM Manufacturing Business Survey Committee, while positive, isn’t all that rosy.

Sabic adds PP compounding to MS site, sees auto opportunities for Stamax long-glass-fiber composites

By Tony Deligio
Published: October 5th, 2010

Sabic Innovative Plastics (Pittsfield, MA) is adding polypropylene (PP) compounding to its Bay St. Louis, MS site, including planned production of its Stamax long-glass-fiber-reinforced PP composites, with an eye on the automotive market.

Syndicate content

© 2011 UBM Canon | please visit these other sites

UBM Canon | Design News | Test & Measurement World | Packaging Digest | EDN | Qmed | Appliance Magazine | Powder Bulk Solids | Canon Trade Shows