is part of the Informa Markets Division of Informa PLC

This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.



Booth N-5350

What's Hot! AGR's CVIS Conveyor Vision Inspection System (Dec '99 PA, p 13) is a stand-alone 'machine vision' device designed to inspect plastic containers as they exit the blow molder on a flat top conveying system. The CVIS identifies critical container defects and helps monitor the performance of the blow molder. It can be configured to inspect critical regions of a container including base, sidewall, and inside finish, along with external finish dimension measurement. Unit is said to perform 100% in-line inspection at speeds from 150 to 300 containers/min (depending on configuration).

Existing Products On Display Also on display will be the BVIS Blowmolder Vision Inspection System (May/June '98 PA, p 28), which is designed to inspect plastic containers while they are inside a two-stage blow molding system at speeds up to 32,000 containers per hour. The BVIS can be configured to monitor one or all of the operator designated criteria. Circle 206

Key Contact David Dineff ­ Tel: 724-482-2163; Fax: 724-482-2767;
E-mail: [email protected];
Web Site: 

Hide comments


  • Allowed HTML tags: <em> <strong> <blockquote> <br> <p>

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.