Sponsored By

Scientists enhance lithium-ion battery performance at the atomic level.

Posted by Staff

March 21, 2023

2 Min Read
HOS-PFM coating
The HOS-PFM conductive binder is made of a nontoxic polymer that transforms at the atomic level in response to heat. Lithium ions and electrons move in synchronicity along the aligned conductive polymer chains.Image courtesy of Jenny Nuss/Berkeley Lab

Scientists at Lawrence Berkeley National Laboratory (Berkeley Lab) have developed a conductive polymer coating — called HOS-PFM — that could enable longer lasting, more powerful lithium-ion batteries for electric vehicles. HOS is an acronym for hierarchically ordered structure.

“The advance opens up a new approach to developing EV batteries that are more affordable and easier to manufacture,” said Gao Liu, a senior scientist in Berkeley Lab’s Energy Technologies Area who led the development of the material.

The HOS-PFM coating conducts both electrons and ions at the same time. This ensures battery stability and high charge/discharge rates while enhancing battery life. The coating also shows promise as a battery adhesive that could extend the lifetime of a lithium-ion battery from an average of 10 years to about 15 years, Liu added.

To demonstrate HOS-PFM’s superior conductive and adhesive properties, Liu and his team coated aluminum and silicon electrodes with HOS-PFM and tested their performance in a lithium-ion battery setup. Silicon and aluminum are promising electrode materials for lithium-ion batteries because of their potentially high energy storage capacity and lightweight profiles. But these cheap and abundant materials quickly wear down after multiple charge/discharge cycles.

During experiments at the Advanced Light Source and the Molecular Foundry, the researchers demonstrated that the HOS-PFM polymer coating significantly prevents silicon- and aluminum-based electrodes from degrading during battery cycling while delivering high battery capacity over 300 cycles, a performance rate that’s on par with today’s state-of-the-art electrodes.

The results are impressive, Liu said, because silicon-based lithium-ion cells typically last for a limited number of charge/discharge cycles and calendar life. The researchers recently described these findings in the journal Nature Energy. The HOS-PFM coating could allow the use of electrodes containing as much as 80% silicon. Such high silicon content could increase the energy density of lithium-ion batteries by at least 30%, Liu said. And because silicon is cheaper than graphite, the standard material for electrodes today, cheaper batteries could significantly increase the availability of entry-level electric vehicles, he added. The team next plans to work with companies to scale up HOS-PFM for mass manufacturing.

The research was supported by the DOE Vehicle Technologies Office. Additional funding was provided by the Toyota Research Institute. The technology is available for licensing.

Sign up for the PlasticsToday NewsFeed newsletter.

You May Also Like