Plastics Industry Association is looking for a few good experts

The Machinery Safety Technical Committee of the Plastics Industry Association (PLASTICS; Washington, DC) is seeking experts for four standards working groups. The descriptions for each group are listed below. If you are interested in joining, email Megan Hayes, PLASTICS’ Director of Industry Standards.

  1. Extrusion: B151.7-2014, Safety requirements for extrusion machines, is due for its five-year review in 2019 and will serve as the base document for the ISO project related to extrusion. The working group will review the document and make any necessary changes.
  2. Robots: B151.27-2013, safety requirements for the integration of robots with injection molding machines, was due for a five-year review in 2018. This working group will review PLASTICS technical documents (including guidelines for electrical interface and mounting patterns) related to robots and injection molding machines and provide a recommendation back to the committee. Please note that the working group's first call is scheduled for Dec. 12, 2018, at 11 AM ET. The consensus body agreed that individuals with expertise regarding robots and injection molding machines are desired for this project.
  3. Blowmolding: B151.31-2014, safety requirements for blowmolding machines, is due for a five-year review in 2019. This working group will review the document and make a recommendation regarding whether to revise, reaffirm or withdraw.
  4. Safety Signs: AN-137, Recommended Guideline for Safety Signs for Plastic Machinery and Related Equipment, needs to be reviewed to determine whether there are certain plastics-specific safety signs that should be retained for future use.

PLASTICS is accredited by the American National Standards Institute (ANSI) to develop, approve, reaffirm, revise or withdraw American National Standards and Technical Reports covering manufacture, integration, care and use of plastics machinery or materials throughout the supply chain. Participation in the committee is open to all interested stakeholders, and there is no charge for membership. These standards and guidelines include requirements for both the manufacturer of the equipment as well as for the user (the processor). To meet ANSI balance requirements, the committee needs additional non-equipment manufacturer members. An application is available on the association's website.

Comments (0)

Please log in or to post comments.
  • Oldest First
  • Newest First
Loading Comments...