is part of the Informa Markets Division of Informa PLC

This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.

Granulator with removable cutting chambers

Article-Granulator with removable cutting chambers

For addressing challenging grinding applications, the Transformer 1624 uses a Duo Pak feature with removable cutting chambers designed for handling parts from bottles to ¼-inch-thick pieces. The cutting chambers can be replaced after exposure to extended wear during abrasive, glass-filled, or high-impact plastic applications. The tangential feed chamber insert accepts a range of rigid parts including bulky blowmolded parts, hot collapsed parisons, and trim. Throat sizes range from 16 by 16 inches to 16 by 32 inches, and horsepower ranges up to 100. The top-drop feed yields continuous feeding for high granulation capacity without flyback or parts-bounce. Rugged outboard pillow block bearings eliminate contamination of plastic material. Electrical/mechanical power actuators open and close the hinged front-feed hopper and hinged screen cradle to provide access to the cutting chamber, knives, and lift-out screens. An hour meter allows preventive maintenance scheduling on knives, bearings, and drive belts.

Granutec, East Douglas, MA
(508) 476-3801

Hide comments


  • Allowed HTML tags: <em> <strong> <blockquote> <br> <p>

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.