is part of the Division of Informa PLC

This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.

Handling system moves resin over long distances

Molders can move large volumes of plastic pellets over long distances with the new Line Vac material loader. The system is compact, quiet, and virtually maintenance free as there are no moving parts. In operation, the Line Vac uses compressed air, which flows through an inlet into an annular plenum chamber. The air is then injected into the throat via directed nozzles. These air jets create a vacuum at the intake, which draws material in and accelerates it through the unit over long vertical or horizontal distances. Flow rate is controlled with a standard pressure regulator. Hoses and clamps are sold separately; stainless steel units and other types are available. Molders can order optional mounting brackets to secure the Line Vac. Diameters and costs follow: 1¼ inches, $102; 1½ inches, $123; and 2 inches, $145.
IMS Co.
Chagrin Falls, OH
(440) 543-1615
www.imscompany.com

Hide comments
account-default-image

Comments

  • Allowed HTML tags: <em> <strong> <blockquote> <br> <p>

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.
Publish