Sign up for the PlasticsToday NewsFeed newsletter.
Sponsored By
The co-located MD&M East and PLASTEC East events ended their three-day run in New York City on Thursday, June 11, as the temperature hit 90-plus degrees. It was sweltering outside, but we found some pretty hot stuff inside the Jacob K. Javits Convention Center, as well.From Stratasys running a 3D-printed mold on a Boy injection molding machine to industrial robots designed to work alongside humans, here are a few of our favorite things from this year's shows.To view the next slide, click on the arrow under the image.
Norbert Sparrow
June 12, 2015
1 Min Read
The co-located MD&M East and PLASTEC East events ended their three-day run in New York City on Thursday, June 11, as the temperature hit 90-plus degrees. It was sweltering outside, but we found some pretty hot stuff inside the Jacob K. Javits Convention Center, as well.
From Stratasys running a 3D-printed mold on a Boy injection molding machine to industrial robots designed to work alongside humans, here are a few of our favorite things from this year's shows.
To view the next slide, click here.
|
|
|
|
About the Author(s)
You May Also Like
