is part of the Informa Markets Division of Informa PLC

This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.

Jaw tool now available in stripper version, ejector sleeve line broadened

Article-Jaw tool now available in stripper version, ejector sleeve line broadened

The veteran K 2000 jaw tool has always been available in the familiar ejector version. But now it is available in a stripper version, the K 2010 (pictured), to provide a solution for all types of molding geometries. The jaws of the tool are effective for contour and cooling, and their length matches the tool width. Warping during curing has no effect on the guide, and the length-to-width ratio also eliminates problems. The stripper version, like the ejector version, is available in eight sizes, each with four jaw heights.

In another development, the manufacturer?s line of ejector sleeves has been considerably widened; they are now available in diameters from 1 to 1.6 mm (in 1/10 mm increments) on the small end and from 16 to 25 mm on the larger end. Pricing information was not provided.

Hasco Internorm Corp. West
Chatsworth, CA
Phone: (800) 266-4272
Fax: (818) 407-5846

Hide comments


  • Allowed HTML tags: <em> <strong> <blockquote> <br> <p>

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.