Sponsored By

A consortium, led by Umeco (Warwickshire, UK) and partnered by Aston Martin Lagonda, Delta Motorsport Ltd., ABB Robotics (Zurich, Switzerland) and Pentangle Engineering Services Ltd. (Grantham, UK) has been established to examine the potential for using high-performance composites in mainstream automotive applications.

PlasticsToday Staff

June 18, 2012

2 Min Read
Partnership targets cost, lightweight composite vehicle structures

A consortium, led by Umeco (Warwickshire, UK) and partnered by Aston Martin Lagonda, Delta Motorsport Ltd., ABB Robotics (Zurich, Switzerland) and Pentangle Engineering Services Ltd. (Grantham, UK) has been established to examine the potential for using high-performance composites in mainstream automotive applications.

NF_120618_acomplice_1_lo_res.jpg

Automation of ply kitting techniques (above) and automation of ply application (below) are some of the solutions that may enable application of affordable composites in vehicles.

NF_120618_acomplice_2_lo_res.jpg

Dubbed 'ACOMPLICE' (Affordable COMPosites for LIghtweight Car StructurEs), the partnership will address the growing pressure on the mainstream automotive sector to manufacture lighter-weight; fuel-efficient vehicles which meet reduce CO2 emission targets. Aluminum and high-strength, steel-based alloys have been employed in response to this, but the physical limitations of these materials have, to a large extent, already been reached, so other options are being pursued.

According to Elaine Arnold, Project Manager - Collaborative Research and Technology at Umeco, "The automotive industry is being forced to seek new technologies in order to comply with the ever tightening, legislative push towards reducing CO2 emissions. The outcome of the ACOMPLICE project should be able to make a significant contribution towards achieving this goal, and offer interesting solutions for this industry and others, where lightweighting is fundamental."

With a total budget of £1.5 million ($2.35 million)- part-funded by the Technology Strategy Board's Collaborative Research and Development program, ACOMPLICE proposes to demonstrate the developed technologies through the rapid manufacture of selected structural automotive parts. Over the next two years, ACOMPLICE aims to significantly reduce the cost of composite body-in-white vehicle structures for the mainstream automotive sector. It is envisaged that the objective can be achieved by the development of pre-impregnated broad application materials suitable for robotic lamination and fast cure technologies.

Umeco's role in ACOMPLICE is to develop fast cure, highly-efficient prepregs, enabling the rapid robotic manipulation and placement of individual plies. Novel materials formatting and molding techniques will be developed alongside these technologies in order to optimize component output rates. Umeco's DForm product will also be used in combination with novel, rapid perform technology in order to facilitate the lamination of complex shaped geometries via automated processes.

DForm is Umeco's deformable composite system, a time and cost-saving prepreg technology that combines the conformability of a short fiber molding compound with the directional characteristics of a high performance, long fiber composite.-[email protected]

Sign up for the PlasticsToday NewsFeed newsletter.

You May Also Like