Solvay’s PEEK polymer gets nod for spinal implant device

Materials supplier Solvay (Alpharetta, GA) announced that medical device company DiFusion Technologies (Austin, TX) chose its Zeniva ZA-500 polyetheretherketone (PEEK) as the base polymer for its ZFUZE osteo-conductive PEEK composite for spinal implants. The compound exhibited large areas of new bone formation on all bone implant surfaces in recent testing by DiFusion, which shared its results at the recent North American Spine Society event in Orlando, FL. 

DiFusion Technologies

Solvay’s biocompatible Zeniva ZA-500 PEEK was chosen by DiFusion Technologies for use in its ZFUZE osteo-conductive PEEK composite for spinal implants. Photo courtesy DiFusion Technologies. 

PEEK is an attractive alternative to titanium for spinal implants because it shares similar modulus to bone, and its radio transparency allows for easy visualization in X-rays, said Solvay in a press release. The polymer is also inert, which means it does not interact with human tissue. While this quality supports biocompatibility, it means that PEEK does not naturally lend itself to bone growth. DiFusion solved this problem by compounding negatively charged zeolites into Solvay’s Zeniva PEEK polymer. 

“It was sort of a penicillin moment,” said Derrick Johns, CEO of DiFusion Technologies. “We started out engineering anti-microbial polymers by first loading zeolite particles with silver before compounding them. But we discovered if we took the silver cations out of the zeolite, they imbued PEEK with a negative charge. Osteoblast cells are attracted to the negatively charged surface at a far higher rate than titanium, and yet we were able to preserve the polymer’s outstanding visualization, modulus and strength benefits,” said Johns in a prepared statement.

Solvay was an early collaborator in the development of DiFusion’s patented ZFUZE composite, combining materials expertise with technical and regulatory support for medical devices. Zeniva ZA-500 PEEK was of particular interest to DiFusion because of the polymer’s higher flow, which facilitates both the compounding process and the extrusion of osteo-conductive implants. 

“In addition to our materials expertise, Solvay’s open innovation business model was instrumental to the successful innovation of DiFusion’s ZFUZE osteo-conductive composite,” said Jeff Hrivnak, Healthcare, at Solvay’s Specialty Polymers Business Unit. “Our collaborative approach to customer projects differentiates us from other PEEK suppliers in this industry, and it allowed us to pool our respective capabilities and resources with DiFusion to solve this demanding challenge.” 

DiFusion’s ZFUZE composite technology is in the final stages of the 510K approval process at FDA and is expected to be commercially available early next year. 

Comments (0)

Please log in or register to post comments.
  • Oldest First
  • Newest First
Loading Comments...