is part of the Informa Markets Division of Informa PLC

This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.

Motion control module supports multiple protocols

Article-Motion control module supports multiple protocols

A new module for the RMC family of motion controllers has been introduced by Delta Computer Systems. The RMC-Serial module combines multiple combination protocols with optical isolation and software-selectable transceivers (RS-232, RS-422, and RS-485). Supported serial protocols include Allen-Bradley DFI, Modicon Modbus/RTU, and other third-party products.

The motion controller can be preprogrammed using Delta?s Event Control Firmware (ECF) table, and RMCWin for mapping discrete inputs and outputs. Other components include a 12-bit analog interface module capable of accepting pressure, force, and joystick inputs, a digital I/O module with high-speed discrete inputs and outputs, and a synchronous serial interface. According to Delta, these features provide better noise immunity and higher resolution.

Delta Computer Systems Inc.
Vancouver, WA
Phone: (360) 254-8688
Fax: (360) 254-5435

Hide comments


  • Allowed HTML tags: <em> <strong> <blockquote> <br> <p>

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.