is part of the Division of Informa PLC

This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.

Sintered vents relieve trapped gas

Standardized sintered air vents are designed to relieve trapped gas in molds, minimize the number of short shot plastic parts and burned plastic parts, and reduce overall injection molding cycle time. The vents are available off-the-shelf in 49 standard sizes from 4 to 28 mm in outside diameter. They are composed of many straight, parallel, and uniform pores made through a thermal process in which powdered metals are compacted and then heated to form a dense metal structure.

Sintered vents can be installed by the moldmaker during the initial tool building process, or they can be installed after a mold tryout reveals defects. The vents range from $7.50 to $63.

D-M-E Co.
Madison Heights, MI
Phone: (248) 398-6000
Fax: (248) 544-5705

Hide comments
account-default-image

Comments

  • Allowed HTML tags: <em> <strong> <blockquote> <br> <p>

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.
Publish