Information about a 2x32-cavity stack mold will be featured at NPE2012 booth (#51043), with the tool developed by Tech Mold, and the custom mold base built by Edro Inc.
Tech Mold recently produced an aerosol-dispensing cap for a major consumer products manufacturer who wanted to reduce material consumption with a thin-walled dispensing cap that would also help to reduce costs.
Using a valve gate hot-runner system from Husky, the thin-wall polypropylene dispensing cap is lightweight, and has the vertical “stack strength” required for shipping aerosol containers safely, the company stated. The customer also wanted to have a mold that could run a sub-8-second cycle, which was achieved in a 500-ton Husky stack molding press.
“This customer is all about cycle time,” said Vince Lomax, vp of Tech Mold, in a news release. “Tech Mold has the technical expertise and the experience to design and build a mold that meets the customer’s challenges. Our customer’s confidence in our expertise was confirmed when the mold went into production quickly and smoothly.”
Tech Mold specializes in stack molds, 2-shot molds, and cube molds for the packaging, medical disposable, and consumer markets.
More information about this 2x32-cavity stack mold, including Edro’s mold base capabilities, will be featured at Edro’s booth #51043.