is part of the Division of Informa PLC

This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.
Home

White Papers

Highlights
altair.jpg
eGuide to Injection Molding
Nov 10, 2020
To remain competitive, the need to constantly improve injection molding processes can benefit from modern...
7_Quick_Purging_Tips.png
7 Quick Purging Tips for Extrusion
Oct 16, 2020
For extrusion plants, reducing waste, time, and cost are some of the most significant factors for staying competitive. Many customers have seen more than a 70% reduction in costs using the right purging compounds, saving them tens of thousands of...
mokon.jpg
5 Tips for Choosing the Best Temperature Control System
Sep 14, 2020
When considering a temperature control system for plastic processing, precision and accuracy are critical. To keep up with increasing demand, Mokon’s expert engineers have developed process heating and cooling equipment that regulates molds, dies...
sonic.jpg
How to Eliminate Combustible Dust in Your Facility
Sep 14, 2020
With the significant amount of dust that is generated by cutting, trimming and finishing plastics products, it’s a challenge to keep up with the housekeeping required to avoid combustible dust accumulation in overhead spaces. Then there is the...
ALPHA_II_FRONT-REFL_image.jpg
Application Note AN M111 MIR-Spectroscopic Reaction Monitoring
Jul 08, 2020
The FTIR spectrometer ALPHA II combines outstanding quality with a small footprint and sets a benchmark in terms of user convenience. With the integrated panel PC and the touch-based operation, FTIR spectroscopy has never been easier. The ALPHA II...
Real-world solutions to the plastic waste challenge
Real-world solutions to the plastic waste challenge
Sep 28, 2019
When China stopped accepting recycled materials from the United States and Europe, it exposed the shortcomings of mechanical recycling. Fortunately, existing and emerging technologies offer other solutions to the plastic waste dilemma. This...
Injection molding design
Injection molding design: The 10 keys to success
Aug 19, 2019
There are 10 parameters that design engineers must keep front of mind when designing parts for injection molding, but they are all predicated on one simple, low-cost method for ensuring perfect molded parts: It’s called partnering with your molder...
Load More