Add rapid part cooling to the conveyor line
You say that ambient air does not cool that molded part moving along the conveyor fast enough, even with fans added. Well, now you can add a portable, spot air-cooling unit to a Dynamic Conveyor modular system right at the point where it’s needed.
April 28, 2010
You say that ambient air does not cool that molded part moving along the conveyor fast enough, even with fans added. Well, now you can add a portable, spot air-cooling unit to a Dynamic Conveyor modular system right at the point where it’s needed.
DynaCon’s Rapid Part Cooling unit will bring air that’s up to 25ºF below room temperature to a designated spot on the conveyor belt. The self-contained, portable unit provides up to 60,000 BTU/hr, offers digital programmable temperature control, and costs as little as $0.10/hr to operate. The system includes a transparent plastic duct structure above the conveyor to keep the cold air flowing over the parts.
The amount of process time that can be saved will vary depending on the atmosphere in that part of the plant, but DynaCon says it will add up to significant money. And should that reduce overall cycle time, so much the better. —[email protected]
About the Author(s)
You May Also Like