Sponsored By

The Tafmer polyolefin and elastomer plant will serve the polypropylene (PP) modification market, among others. The company also cited logistics issues as a barrier to increased exports of polyethylenes from North America to Asia.

Stephen Moore

June 25, 2018

3 Min Read
Japan’s Mitsui Chemicals plans POE/POP plant in North America; sees minor impact from shale-gas derived polyethylenes in

Tsutomu Tannowa, President & CEO of Japan’s Mitsui Chemicals recently discussed the company’s most recent financial results and the business outlook for the current year at an event at the company headquarters in Tokyo, where he hinted at a major impending development in the company’s Tafmer polyolefin plastomer and elastomer (POP/POE) business.

Mitsui Chemicals has for some time now been studying the construction of a new plant for Tafmer, which is primarily used in impact modification for automotive polypropylene (PP) grades but also finds application in packaging, wire & cable, footwear and engineering plastic modification applications. Besides North America, China and Singapore were viewed as potential sites for the new facility. The company already operates two 100,000-tonnes/year production units for Tafmer in Singapore.

Mitsui Chemicals President & CEO Tsutomu Tannowa: Mulling options for building an polyolefin elastomer/plastomer plant cost effectively in North America

From a market perspective, North America appears to be the first choice locale, but high construction costs remain as a major negative factor. According to Tannowa: “Construction costs in North America have not shown any signs of decline yet, but we are proceeding with our examination from a range of angles. To cite one example, we can adopt a method in which construction costs are reduced by building a plant in an area where construction is inexpensive until the intermediate stage and assembling it in North America at the final stage. We will proceed with our examination of various options such as this one and make a decision at an early stage.”

In terms of the North American market, Mitsui Chemical notes that while automobile production is failing to grow in North America, output of full-sized cars that use large quantities of plastic, such as sport utility vehicles (SUVs) and pickup trucks is increasing. “Weight reduction is also continuing as an overall trend for cars. We expect the quantity of resins used per vehicle to keep rising. Regarding the shift to electric vehicles (EVs), PP compounds may be adopted for hoods and other sections as a result of the power source switch from [gasoline] engines to [electric] motors, which lowers thermal resistance requirements. We are planning to make proposals to cash in on that possibility,” notes Tannowa.

In Europe, meanwhile, Mitsui Chemicals will start up production of PP compounds at a new plant in the Netherlands in June 2020. “We expect the output of the facility to rise to the maximum level immediately after its launch because the current sales volume for outsourced production is close to 30,000 tonnes [annually],” says Tannowa. “We are already in the stage of studying the expansion of this facility as the next step.”

Back in North America, Mitsui Chemicals notes that there has been a view that exporting shale-derived polyethylenes to other Asian countries is difficult because of bottlenecks, including logistics infrastructure. “The conditions for their export have grown more severe in the most recent period due to problems in areas including packing and the securing of transportation personnel,” says Tannowa. “North American products account for [only] about 6% of the polyethylenes imported by China at this point. Shale-derived products are not having a major impact.”

About the Author(s)

Stephen Moore

Stephen has been with PlasticsToday and its preceding publications Modern Plastics and Injection Molding since 1992, throughout this time based in the Asia Pacific region, including stints in Japan, Australia, and his current location Singapore. His current beat focuses on automotive. Stephen is an avid folding bicycle rider, often taking his bike on overseas business trips, and is a proud dachshund owner.

Sign up for the PlasticsToday NewsFeed newsletter.

You May Also Like