Sponsored By

May 1, 2000

1 Min Read

Booth N-7558

npe39.jpgWhat's Hot! A tiny hot runner system (Apr '00 PA, p 6) made in Germany by Heitec will be on display. The system is based on a 'flat nozzle concept' but Heitec has succeeded in making the system smaller and created a miniature hot tip nozzle. Minimum nozzle spacing of 7 mm (0.276 in.) is possible with nozzle length starting at 22.5 mm (0.866 in.). Each nozzle can be controlled separately with any 220-240 v 'J' type thermocouple temperature controller.

Existing Products On Display will include other Heitec hot runner systems, MCS temperature controllers, Sensonetics pressure/ temperature transducers and Feller controllers.

Cool Booth Details A 10-cavity demonstration mold with a 156 x 156 mm mold base size will produce cable ties from a nylon 6/6 resin. Circle 288

Booth Personnel Paul Boettger, Joachim Boettger

Key Contact Paul Boettger, VP ­ Tel: 905-794-1342; Fax: 905-794-3405; 
E-mail: [email protected];
Web Site: www.jpitech.com 

Sign up for the PlasticsToday NewsFeed newsletter.

You May Also Like