is part of the Informa Markets Division of Informa PLC

This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.

System cleans nitrogen for gas-assist molding

Article-System cleans nitrogen for gas-assist molding

New nitrogen generation systems from Gain Technologies have been redesigned to increase performance and reliability. The systems were developed to supply clean, dry, oil-free nitrogen for storage and use in gas-assist applications. The units produce 95 to 99.5 percent pure, dry nitrogen at pressures up to 2500 psig from a compressed air source.

A membrane module generates the nitrogen, and an air-driven booster helps eliminate oil-contaminated nitrogen from electric-driven compressors. The units are available in both 5- and 10-cfm models. The 5-cfm model is upgradable. Minimum requirements for both models are 100 psi at flow rates of 110 cfm and 140 cfm, respectively. Both units require 120V
a-c, though 220V a-c is available.

Gain Technologies
Southfield, MI
Phone: (810) 254-9000
Fax: (810) 254-9084

Hide comments


  • Allowed HTML tags: <em> <strong> <blockquote> <br> <p>

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.