is part of the Informa Markets Division of Informa PLC

This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.

Resin Price Report: Buyers Unmoved by Increased Resin Inventory

Article-Resin Price Report: Buyers Unmoved by Increased Resin Inventory

PeopleImages/iStock via Getty Images bored woman in front of laptop
Prime PE and PP prices stayed flat during a below-average week in spot resin trading.

Prime polyethylene (PE) and polypropylene (PP) prices held flat last week, as business became a bit more challenging amid additional upstream inventory growth and modest interest from buyers, reports the PlasticsExchange in its Market Update.

A smattering of both PE and PP off-grade railcars were available in the spot market. While some sold, offers seemed to accumulate. Prime railcars could be ordered with a little lead time. There was good demand for packaged truckloads for prompt shipment, some fringe commodity grades were scarce, and when found, buyers willingly paid a premium.

There was decent export interest, but Houston levels did not necessarily support incremental sales through the secondary market. Producers have nominated increases for May PE and PP contracts, but there is little chance for implementation, according to the PlasticsExchange.

Ineos lifts force majeure

The PE market was slightly less active compared with the previous week — demand eased as material availability has grown. Ineos lifted its force majeure on high-density (HD) PE at its La Porte facility in Texas, leaving three producers with force majeure declarations still in place. Spot PE prices didn’t move, having already come off over the past several weeks. Relatively heavy offerings of wide-spec railcars continued and Prime material was available for the asking. Resellers were eager to flip railcars, so competitive offers were plentiful. They have also thinned their inventories, however, creating some sourcing challenges for packaged truckloads.

Exports at lowest point since October

Linear-low-density PE and low-density PE film grades transacted the most on the PlasticsExchange platform, followed by HDPE blow molding. Little interest was shown for PE injection grades. Meanwhile, Shell’s PE facility in the Northeast is scheduled to be down until Q3. According to preliminary figures released by the American Chemistry Council (ACC), domestic PE sales dropped considerably in April, after producers managed to implement their $0.03/lb increase in March, which was not supported in the spot market. Though resin reactor rates were dialed back down, the fall in demand, including lighter exports — the lowest since October due somewhat to competitive international offers — caused upstream inventories to swell significantly for a second straight month.

Undeterred by these negative fundamentals, producers continue their pursuit of a nickel increase for May before the unpredictable summer hurricane season. Given plentiful supplies and the soft spot market, the PlasticsExchange doubts that the May increase will take hold. Just keeping the March increase intact might be considered a win upstream, according to the resin clearinghouse.

PP resin contracts unwind steep increases

The PP market remained soft heading into mid-month. Buyers sought truckloads more than railcars, and spot prices managed steady after already giving back the bulk of their 2023 gains. Contracts have also been unwinding their steep increases, with $0.11/lb relinquished in April and another sizable chunk expected to come off in May, alongside the imminent PGP cost decrease. 

There was good demand for somewhat scarce co-polymer and processors were willing to pay a premium for spot supplies of No Break resins in a variety of melt flows. Preliminary April PP supply/demand data showed a sizable drop in year-over-year domestic sales, but they did come in about average compared to the past eight months. Reactors ran just under 75% capacity for the third month in a row while exports grew nicely. Together, this contributed to a fourth straight monthly inventory increase, albeit a relatively small one. The PlasticsExchange encourages resin pricing watchers to subscribe to the ACC for specific figures.

Read the full Market Update, including news about PGP pricing and energy futures, on the PlasticsExchange website. For a comprehensive review of resin pricing and activity in the first quarter of 2023, read this analysis by Zachary Moore of business intelligence firm ICIS.

Hide comments


  • Allowed HTML tags: <em> <strong> <blockquote> <br> <p>

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.
resin-insider-cover-1540 copy_0
Source Resin Like a Pro

Get expert insights on the forces that drive resin pricing and how to navigate the market to ensure you’re getting the best possible deal. 

resin-insider-cover-1540 copy_0