is part of the Division of Informa PLC

This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.

Plastics parts get the right spray job

A flatbed coating unit to coat injection molded parts is user friendly to operate and can be equipped with a multilevel conveying system with frames in sizes of 1600 by 800 mm as well as a usable height of 150 mm. Coating agents that are solvent-based, as well as water-based paints, can be applied in this unit. It is designed with an ionization zone with automatic servocontrolled height adjustment, preparation in the form of a flame surface activation station, spray cabin with automatic servo driven height adjustment of the spray trapeze, and unheated and heated evaporation zones. At a medium conveying rate of 1 m/min, an actual surface coating capacity of 1.28 m/min can be achieved. Adjustment of the spray guns is carried out by means of a laser pointer adjustment aid. Sprimag Spritzmaschinenbau GmbH & Co. KG, Kirchheim/Teck, Germany; +49 7021 579101; www.sprimag.com

Hide comments
account-default-image

Comments

  • Allowed HTML tags: <em> <strong> <blockquote> <br> <p>

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.
Publish