is part of the Informa Markets Division of Informa PLC

This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.

Hot runner nozzle made for small molds

Article-Hot runner nozzle made for small molds

The Series 25D hot runner nozzle was developed to fit into smaller mold bases. It fits directly into standard mold bases, replaces cold sprue bushings, and is suited for retrofit into existing cold sprue bushing applications. With a new SFC heater, the nozzle is designed to eliminate cold sprue waste and decrease cycle time. It features interchangeable tips with optional extra stock, a flexible lead end potting adapter that can be bent to suit, and a 2-inch head diameter with 1/4- and 1-inch nozzle shank. The nozzle is available in lengths to suit standard mold plate thicknesses.

It costs approximately $500 for the nozzle assembly and just less than $1000 for the assembly with a single-zone temperature controller.

Osco Inc.
Rochester Hills, MI
Phone: (248) 852-7310
Fax: (248) 852-7183

Hide comments


  • Allowed HTML tags: <em> <strong> <blockquote> <br> <p>

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.